Mercedes-Benz

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm Saber más

Odometer gears for Mercedes with mechanical VDO Speedometers / Odometers. ( cable driven) Tooth count option between 10 and 25 teeth. Please count teeth on the original gear before you order a new one. We also recommend to inspect the lead gear, make sure it is tight on the shaft. Saber más

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm Saber más

Gear for Wiper Transmission only. (Not for Wiper Motor) Saber más

Odometer gears for Mercedes with mechanical VDO Speedometers / Odometers. ( cable driven) Tooth count option between 10 and 25 teeth. Please count teeth on the original gear before you order a new one. We also recommend to inspect the lead gear, make sure it is tight on the shaft. Saber más

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm Saber más

Three Odometer Gear Set for VDO Instrument Clusters only. (Electronic Speedometer) Models- 400E, 500E, E420, E500 There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 21 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Saber más

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) Models- 400E, 500E, E420, E500 There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 21 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Saber más

Odometer gears for Mercedes with mechanical VDO Speedometers / Odometers. ( cable driven) Tooth count option between 10 and 25 teeth. Please count teeth on the original gear before you order a new one. We also recommend to inspect the lead gear, make sure it is tight on the shaft. Saber más